"/etc\" -std=c++11 -g -O2 -MT src/ohinfo.o -MD -MP -MF $depbase.Tpo -c -o src/ohinfo.o src/ohinfo.cxx &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo src/ohmetacache.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ g++ -DHAVE_CONFIG_H -I. -I./src -DDEBUG -g -Wall -pthread -I/usr/include/arm-linux-gnueabihf -I/usr/include/upnp -I/usr/include/p11-kit-1 -I/usr/include/jsoncpp -I./src -I./src/mediaserver/cdplugins -DDATADIR=\"/usr/share/upmpdcli\" -DCONFIGDIR=\"/etc\" -std=c++11 -g -O2 -MT src/ohmetacache.o -MD -MP -MF $depbase.Tpo -c -o src/ohmetacache.o src/ohmetacache.cxx &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo src/ohplaylist.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ g++ -DHAVE_CONFIG_H -I. -I./src -DDEBUG -g -Wall -pthread -I/usr/include/arm-linux-gnueabihf -I/usr/include/upnp -I/usr/include/p11-kit-1 -I/usr/include/jsoncpp -I./src -I./src/mediaserver/cdplugins -DDATADIR=\"/usr/share/upmpdcli\" -DCONFIGDIR=\"/etc\" -std=c++11 -g -O2 -MT src/ohplaylist.o -MD -MP -MF $depbase.Tpo -c -o src/ohplaylist.o src/ohplaylist.cxx &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo src/ohproduct.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ g++ -DHAVE_CONFIG_H -I. -I./src -DDEBUG -g -Wall -pthread -I/usr/include/arm-linux-gnueabihf -I/usr/include/upnp -I/usr/include/p11-kit-1 -I/usr/include/jsoncpp -I./src -I./src/mediaserver/cdplugins -DDATADIR=\"/usr/share/upmpdcli\" -DCONFIGDIR=\"/etc\" -std=c++11 -g -O2 -MT src/ohproduct.o -MD -MP -MF $depbase.Tpo -c -o src/ohproduct.o src/ohproduct.cxx &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo src/ohradio.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ g++ -DHAVE_CONFIG_H -I. -I./src -DDEBUG -g -Wall -pthread -I/usr/include/arm-linux-gnueabihf -I/usr/include/upnp -I/usr/include/p11-kit-1 -I/usr/include/jsoncpp -I./src -I./src/mediaserver/cdplugins -DDATADIR=\"/usr/share/upmpdcli\" -DCONFIGDIR=\"/etc\" -std=c++11 -g -O2 -MT src/ohradio.o -MD -MP -MF $depbase.Tpo -c -o src/ohradio.o src/ohradio.cxx &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo src/ohreceiver.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ g++ -DHAVE_CONFIG_H -I. -I./src -DDEBUG -g -Wall -pthread -I/usr/include/arm-linux-gnueabihf -I/usr/include/upnp -I/usr/include/p11-kit-1 -I/usr/include/jsoncpp -I./src -I./src/mediaserver/cdplugins -DDATADIR=\"/usr/share/upmpdcli\" -DCONFIGDIR=\"/etc\" -std=c++11 -g -O2 -MT src/ohreceiver.o -MD -MP -MF $depbase.Tpo -c -o src/ohreceiver.o src/ohreceiver.cxx &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo src/ohsndrcv.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ g++ -DHAVE_CONFIG_H -I. -I./src -DDEBUG -g -Wall -pthread -I/usr/include/arm-linux-gnueabihf -I/usr/include/upnp -I/usr/include/p11-kit-1 -I/usr/include/jsoncpp -I./src -I./src/mediaserver/cdplugins -DDATADIR=\"/usr/share/upmpdcli\" -DCONFIGDIR=\"/etc\" -std=c++11 -g -O2 -MT src/ohsndrcv.o -MD -MP -MF $depbase.Tpo -c -o src/ohsndrcv.o src/ohsndrcv.cxx &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo src/ohtime.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ g++ -DHAVE_CONFIG_H -I. -I./src -DDEBUG -g -Wall -pthread -I/usr/include/arm-linux-gnueabihf -I/usr/include/upnp -I/usr/include/p11-kit-1 -I/usr/include/jsoncpp -I./src -I./src/mediaserver/cdplugins -DDATADIR=\"/usr/share/upmpdcli\" -DCONFIGDIR=\"/etc\" -std=c++11 -g -O2 -MT src/ohtime.o -MD -MP -MF $depbase.Tpo -c -o src/ohtime.o src/ohtime.cxx &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo src/ohvolume.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ g++ -DHAVE_CONFIG_H -I. -I./src -DDEBUG -g -Wall -pthread -I/usr/include/arm-linux-gnueabihf -I/usr/include/upnp -I/usr/include/p11-kit-1 -I/usr/include/jsoncpp -I./src -I./src/mediaserver/cdplugins -DDATADIR=\"/usr/share/upmpdcli\" -DCONFIGDIR=\"/etc\" -std=c++11 -g -O2 -MT src/ohvolume.o -MD -MP -MF $depbase.Tpo -c -o src/ohvolume.o src/ohvolume.cxx &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo src/protocolinfo.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ g++ -DHAVE_CONFIG_H -I. -I./src -DDEBUG -g -Wall -pthread -I/usr/include/arm-linux-gnueabihf -I/usr/include/upnp -I/usr/include/p11-kit-1 -I/usr/include/jsoncpp -I./src -I./src/mediaserver/cdplugins -DDATADIR=\"/usr/share/upmpdcli\" -DCONFIGDIR=\"/etc\" -std=c++11 -g -O2 -MT src/protocolinfo.o -MD -MP -MF $depbase.Tpo -c -o src/protocolinfo.o src/protocolinfo.cxx &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo src/pathut.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ g++ -DHAVE_CONFIG_H -I. -I./src -DDEBUG -g -Wall -pthread -I/usr/include/arm-linux-gnueabihf -I/usr/include/upnp -I/usr/include/p11-kit-1 -I/usr/include/jsoncpp -I./src -I./src/mediaserver/cdplugins -DDATADIR=\"/usr/share/upmpdcli\" -DCONFIGDIR=\"/etc\" -std=c++11 -g -O2 -MT src/pathut.o -MD -MP -MF $depbase.Tpo -c -o src/pathut.o src/pathut.cpp &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo src/readfile.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ g++ -DHAVE_CONFIG_H -I. -I./src -DDEBUG -g -Wall -pthread -I/usr/include/arm-linux-gnueabihf -I/usr/include/upnp -I/usr/include/p11-kit-1 -I/usr/include/jsoncpp -I./src -I./src/mediaserver/cdplugins -DDATADIR=\"/usr/share/upmpdcli\" -DCONFIGDIR=\"/etc\" -std=c++11 -g -O2 -MT src/readfile.o -MD -MP -MF $depbase.Tpo -c -o src/readfile.o src/readfile.cpp &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo src/renderctl.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ g++ -DHAVE_CONFIG_H -I. -I./src -DDEBUG -g -Wall -pthread -I/usr/include/arm-linux-gnueabihf -I/usr/include/upnp -I/usr/include/p11-kit-1 -I/usr/include/jsoncpp -I./src -I./src/mediaserver/cdplugins -DDATADIR=\"/usr/share/upmpdcli\" -DCONFIGDIR=\"/etc\" -std=c++11 -g -O2 -MT src/renderctl.o -MD -MP -MF $depbase.Tpo -c -o src/renderctl.o src/renderctl.cxx &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo src/smallut.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ g++ -DHAVE_CONFIG_H -I. -I./src -DDEBUG -g -Wall -pthread -I/usr/include/arm-linux-gnueabihf -I/usr/include/upnp -I/usr/include/p11-kit-1 -I/usr/include/jsoncpp -I./src -I./src/mediaserver/cdplugins -DDATADIR=\"/usr/share/upmpdcli\" -DCONFIGDIR=\"/etc\" -std=c++11 -g -O2 -MT src/smallut.o -MD -MP -MF $depbase.Tpo -c -o src/smallut.o src/smallut.cpp &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo src/upmpd.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ g++ -DHAVE_CONFIG_H -I. -I./src -DDEBUG -g -Wall -pthread -I/usr/include/arm-linux-gnueabihf -I/usr/include/upnp -I/usr/include/p11-kit-1 -I/usr/include/jsoncpp -I./src -I./src/mediaserver/cdplugins -DDATADIR=\"/usr/share/upmpdcli\" -DCONFIGDIR=\"/etc\" -std=c++11 -g -O2 -MT src/upmpd.o -MD -MP -MF $depbase.Tpo -c -o src/upmpd.o src/upmpd.cxx &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo src/upmpdutils.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ g++ -DHAVE_CONFIG_H -I. -I./src -DDEBUG -g -Wall -pthread -I/usr/include/arm-linux-gnueabihf -I/usr/include/upnp -I/usr/include/p11-kit-1 -I/usr/include/jsoncpp -I./src -I./src/mediaserver/cdplugins -DDATADIR=\"/usr/share/upmpdcli\" -DCONFIGDIR=\"/etc\" -std=c++11 -g -O2 -MT src/upmpdutils.o -MD -MP -MF $depbase.Tpo -c -o src/upmpdutils.o src/upmpdutils.cxx &&\ mv -f $depbase.Tpo $depbase.Po g++ -std=c++11 -g -O2 -o upmpdcli src/avtransport.o src/closefrom.o src/conftree-fixed.o src/conman.o src/execmd-fixed.o src/httpfs.o src/main.o src/mediaserver/cdplugins/cmdtalk-fixed.o src/mediaserver/cdplugins/plgwithslave.o src/mediaserver/contentdirectory.o src/mediaserver/mediaserver.o src/mpdcli.o src/netcon-fixed.o src/ohinfo.o src/ohmetacache.o src/ohplaylist.o src/ohproduct.o src/ohradio.o src/ohreceiver.o src/ohsndrcv.o src/ohtime.o src/ohvolume.o src/protocolinfo.o src/pathut.o src/readfile.o src/renderctl.o src/smallut.o src/upmpd.o src/upmpdutils.o -lpthread -lupnpp -lcurl -pthread -lupnp -lthreadutil -lixml -lmpdclient -lmicrohttpd -ljsoncpp depbase=`echo scctl_src/scctl.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ g++ -DHAVE_CONFIG_H -I. -I./src -DDEBUG -g -Wall -pthread -I/usr/include/arm-linux-gnueabihf -I/usr/include/upnp -I/usr/include/p11-kit-1 -I/usr/include/jsoncpp -I./src -I./src/mediaserver/cdplugins -DDATADIR=\"/usr/share/upmpdcli\" -DCONFIGDIR=\"/etc\" -std=c++11 -g -O2 -MT scctl_src/scctl.o -MD -MP -MF $depbase.Tpo -c -o scctl_src/scctl.o scctl_src/scctl.cpp &&\ mv -f $depbase.Tpo $depbase.Po g++ -std=c++11 -g -O2 -o scctl scctl_src/scctl.o src/netcon-fixed.o src/smallut.o src/upmpdutils.o -lpthread -lupnpp -lcurl -pthread -lupnp -lthreadutil -lixml -lmpdclient make[1]: Leaving directory '/home/pi/mosbuild/upmpdcli-code' make install-am make[1]: Entering directory '/home/pi/mosbuild/upmpdcli-code' (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /home/pi/mosbuild/upmpdcli-code/missing autoheader) rm -f src/stamp-h1 touch src/config.h.in cd . && /bin/bash ./config.status src/config.h config.status: creating src/config.h config.status: src/config.h is unchanged make[2]: Entering directory '/home/pi/mosbuild/upmpdcli-code' /bin/mkdir -p '/usr/bin' /usr/bin/install -c upmpdcli scctl '/usr/bin' /bin/mkdir -p '/etc' /usr/bin/install -c -m 644 src/upmpdcli.conf-dist '/etc' /bin/mkdir -p '/usr/share/upmpdcli/cdplugins/gmusic' /usr/bin/install -c -m 644 src/mediaserver/cdplugins/gmusic/gmusic-app.py src/mediaserver/cdplugins/gmusic/session.py '/usr/share/upmpdcli/cdplugins/gmusic' /bin/mkdir -p '/usr/share/upmpdcli/cdplugins/pycommon' /usr/bin/install -c -m 644 src/mediaserver/cdplugins/pycommon/cmdtalk.py src/mediaserver/cdplugins/pycommon/cmdtalkplugin.py src/mediaserver/cdplugins/pycommon/conftree.py src/mediaserver/cdplugins/pycommon/routing.py src/mediaserver/cdplugins/pycommon/upmplgmodels.py src/mediaserver/cdplugins/pycommon/upmplgutils.py '/usr/share/upmpdcli/cdplugins/pycommon' /bin/mkdir -p '/usr/share/upmpdcli/cdplugins/qobuz' /usr/bin/install -c -m 644 src/mediaserver/cdplugins/qobuz/debug.py src/mediaserver/cdplugins/qobuz/exception.py src/mediaserver/cdplugins/qobuz/__init__.py src/mediaserver/cdplugins/qobuz/qobuz-app.py src/mediaserver/cdplugins/qobuz/session.py '/usr/share/upmpdcli/cdplugins/qobuz' /bin/mkdir -p '/usr/share/upmpdcli/cdplugins/qobuz/api' /usr/bin/install -c -m 644 src/mediaserver/cdplugins/qobuz/api/easy.py src/mediaserver/cdplugins/qobuz/api/__init__.py src/mediaserver/cdplugins/qobuz/api/raw.py '/usr/share/upmpdcli/cdplugins/qobuz/api' /bin/mkdir -p '/usr/share/upmpdcli/cdplugins/tidal' /usr/bin/install -c -m 644 src/mediaserver/cdplugins/tidal/tidal-app.py '/usr/share/upmpdcli/cdplugins/tidal' /bin/mkdir -p '/usr/share/upmpdcli/cdplugins/tidal/tidalapi' /usr/bin/install -c -m 644 src/mediaserver/cdplugins/tidal/tidalapi/__init__.py src/mediaserver/cdplugins/tidal/tidalapi/models.py '/usr/share/upmpdcli/cdplugins/tidal/tidalapi' /bin/mkdir -p '/usr/share/upmpdcli/cdplugins/uprcl' /usr/bin/install -c -m 644 src/mediaserver/cdplugins/uprcl/rclconfig-fields src/mediaserver/cdplugins/uprcl/rwlock.py src/mediaserver/cdplugins/uprcl/uprcl-app.py src/mediaserver/cdplugins/uprcl/uprclfolders.py src/mediaserver/cdplugins/uprcl/uprclhttp.py src/mediaserver/cdplugins/uprcl/uprclindex.py src/mediaserver/cdplugins/uprcl/uprclinit.py src/mediaserver/cdplugins/uprcl/uprclsearch.py src/mediaserver/cdplugins/uprcl/uprcltags.py src/mediaserver/cdplugins/uprcl/uprcluntagged.py src/mediaserver/cdplugins/uprcl/uprclutils.py '/usr/share/upmpdcli/cdplugins/uprcl' /bin/mkdir -p '/usr/share/upmpdcli' /usr/bin/install -c -m 644 src/description.xml src/AVTransport.xml src/RenderingControl.xml src/ConnectionManager.xml src/OHProduct.xml src/OHInfo.xml src/OHTime.xml src/OHVolume.xml src/OHPlaylist.xml src/OHReceiver.xml src/OHRadio.xml src/mediaserver/ContentDirectory.xml src/protocolinfo.txt src/presentation.html src/upmpdcli.conf-dist '/usr/share/upmpdcli' /bin/mkdir -p '/usr/share/upmpdcli' /usr/bin/install -c samplescripts/Analog-Input '/usr/share/upmpdcli' /bin/mkdir -p '/usr/share/man/man1' /usr/bin/install -c -m 644 man/upmpdcli.1 '/usr/share/man/man1' make install-data-hook make[3]: Entering directory '/home/pi/mosbuild/upmpdcli-code' if test -d ./web; then \ (cd .; tar cvzf - web) > web.tar.gz; \ fi web/ web/static/ web/static/style.css web/bottle.py web/views/ web/views/main.tpl web/views/footer.tpl web/views/menu.tpl web/views/assoc.tpl web/views/list.tpl web/views/stop.tpl web/views/header.tpl web/init/ web/init/default-scweb web/init/scweb-service web/scweb.py web/scweb-standalone.py if test -d ./rdpl2stream; then \ (cd .; rm -rf rdpl2stream/__pycache__/; \ tar cvzf - rdpl2stream) > rdpl2stream.tar.gz; \ fi rdpl2stream/ rdpl2stream/XspfPlaylistDecoder.py rdpl2stream/PlsPlaylistDecoder.py rdpl2stream/fetchStream.py rdpl2stream/RamPlaylistDecoder.py rdpl2stream/AsxPlaylistDecoder.py rdpl2stream/AsfPlaylistDecoder.py rdpl2stream/COPYING rdpl2stream/M3uPlaylistDecoder.py rdpl2stream/UrlInfo.py rdpl2stream/README rdpl2stream/__init__.py rdpl2stream/CONTRIBUTORS rdpl2stream/AUTHORS rdpl2stream/StreamDecoder.py rdpl2stream/lib/ rdpl2stream/lib/DummyMMSHandler.py rdpl2stream/lib/__init__.py rdpl2stream/lib/common.py if test -d ./src/mediaserver/cdplugins/uprcl/bottle; then \ (cd ./src/mediaserver; tar cvzf - cdplugins/uprcl/bottle) > \ uprclbottle.tar.gz; \ fi cdplugins/uprcl/bottle/ cdplugins/uprcl/bottle/static/ cdplugins/uprcl/bottle/static/style.css cdplugins/uprcl/bottle/views/ cdplugins/uprcl/bottle/views/main.tpl cdplugins/uprcl/bottle/views/footer.tpl cdplugins/uprcl/bottle/views/header.tpl (cd /etc; test -f upmpdcli.conf || \ mv upmpdcli.conf-dist upmpdcli.conf; chmod 600 upmpdcli.conf) (cd /usr/share/upmpdcli; tar xzf -) < web.tar.gz (cd /usr/share/upmpdcli; tar xzf -) < rdpl2stream.tar.gz (cd /usr/share/upmpdcli; tar xzf -) < uprclbottle.tar.gz (cd /usr/share/upmpdcli; test -d src_scripts || mkdir src_scripts) (cd //usr/share/upmpdcli/cdplugins/tidal; chmod a+x tidal-app.py) (cd //usr/share/upmpdcli/cdplugins/qobuz; chmod a+x qobuz-app.py) (cd //usr/share/upmpdcli/cdplugins/gmusic; chmod a+x gmusic-app.py) (cd //usr/share/upmpdcli/cdplugins/uprcl; chmod a+x uprcl-app.py) make[3]: Leaving directory '/home/pi/mosbuild/upmpdcli-code' make[2]: Leaving directory '/home/pi/mosbuild/upmpdcli-code' make[1]: Leaving directory '/home/pi/mosbuild/upmpdcli-code' ** Cleanup ** Configure runtime env ** Compile Upexplorer configure.ac:6: installing './install-sh' configure.ac:6: installing './missing' Makefile.am: installing './depcomp' checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for g++... g++ checking whether the C++ compiler works... yes checking for C++ compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking for style of include used by make... GNU checking dependency style of g++... gcc3 checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/localconfig.h config.status: executing depfiles commands depbase=`echo src/typedservice.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ g++ -DHAVE_CONFIG_H -I. -I./src -std=c++11 -g -O2 -MT src/typedservice.o -MD -MP -MF $depbase.Tpo -c -o src/typedservice.o src/typedservice.cpp &&\ mv -f $depbase.Tpo $depbase.Po g++ -std=c++11 -g -O2 -o typedservice src/typedservice.o -lupnpp -lpthread -lrt depbase=`echo src/ohsender.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ g++ -DHAVE_CONFIG_H -I. -I./src -std=c++11 -g -O2 -MT src/ohsender.o -MD -MP -MF $depbase.Tpo -c -o src/ohsender.o src/ohsender.cpp &&\ mv -f $depbase.Tpo $depbase.Po g++ -std=c++11 -g -O2 -o ohsender src/ohsender.o -lupnpp -lpthread -lrt depbase=`echo src/ohradio.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ g++ -DHAVE_CONFIG_H -I. -I./src -std=c++11 -g -O2 -MT src/ohradio.o -MD -MP -MF $depbase.Tpo -c -o src/ohradio.o src/ohradio.cpp &&\ mv -f $depbase.Tpo $depbase.Po g++ -std=c++11 -g -O2 -o ohradio src/ohradio.o -lupnpp -lpthread -lrt depbase=`echo src/upexplo.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ g++ -DHAVE_CONFIG_H -I. -I./src -std=c++11 -g -O2 -MT src/upexplo.o -MD -MP -MF $depbase.Tpo -c -o src/upexplo.o src/upexplo.cpp &&\ mv -f $depbase.Tpo $depbase.Po g++ -std=c++11 -g -O2 -o upexplorer src/upexplo.o -lupnpp -lpthread -lrt depbase=`echo src/multirdr.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ g++ -DHAVE_CONFIG_H -I. -I./src -std=c++11 -g -O2 -MT src/multirdr.o -MD -MP -MF $depbase.Tpo -c -o src/multirdr.o src/multirdr.cpp &&\ mv -f $depbase.Tpo $depbase.Po g++ -std=c++11 -g -O2 -o multirdr src/multirdr.o -lupnpp -lpthread -lrt g++ -DHAVE_CONFIG_H -I. -I./src -I/usr/include/libupnpp -I./src -DHAVE_STD_FUTURE=1 -std=c++11 -g -O2 -MT upsend_src/upsend-upsend.o -MD -MP -MF upsend_src/.deps/upsend-upsend.Tpo -c -o upsend_src/upsend-upsend.o `test -f 'upsend_src/upsend.cpp' || echo './'`upsend_src/upsend.cpp upsend_src/upsend.cpp:161:2: warning: #warning "problem with resource values!" [-Wcpp] #warning "problem with resource values!" ^~~~~~~ mv -f upsend_src/.deps/upsend-upsend.Tpo upsend_src/.deps/upsend-upsend.Po g++ -DHAVE_CONFIG_H -I. -I./src -I/usr/include/libupnpp -I./src -DHAVE_STD_FUTURE=1 -std=c++11 -g -O2 -MT upsend_src/upsend-streamer.o -MD -MP -MF upsend_src/.deps/upsend-streamer.Tpo -c -o upsend_src/upsend-streamer.o `test -f 'upsend_src/streamer.cpp' || echo './'`upsend_src/streamer.cpp mv -f upsend_src/.deps/upsend-streamer.Tpo upsend_src/.deps/upsend-streamer.Po g++ -DHAVE_CONFIG_H -I. -I./src -I/usr/include/libupnpp -I./src -DHAVE_STD_FUTURE=1 -std=c++11 -g -O2 -MT upsend_src/upsend-wav.o -MD -MP -MF upsend_src/.deps/upsend-wav.Tpo -c -o upsend_src/upsend-wav.o `test -f 'upsend_src/wav.cpp' || echo './'`upsend_src/wav.cpp mv -f upsend_src/.deps/upsend-wav.Tpo upsend_src/.deps/upsend-wav.Po g++ -std=c++11 -g -O2 -o upsend upsend_src/upsend-upsend.o upsend_src/upsend-streamer.o upsend_src/upsend-wav.o -lupnpp -lmicrohttpd -lpthread -lrt depbase=`echo src/uplistdir.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ g++ -DHAVE_CONFIG_H -I. -I./src -std=c++11 -g -O2 -MT src/uplistdir.o -MD -MP -MF $depbase.Tpo -c -o src/uplistdir.o src/uplistdir.cpp &&\ mv -f $depbase.Tpo $depbase.Po g++ -std=c++11 -g -O2 -o uplistdir src/uplistdir.o -lupnpp -lpthread -lrt depbase=`echo src/dumpXML.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ g++ -DHAVE_CONFIG_H -I. -I./src -std=c++11 -g -O2 -MT src/dumpXML.o -MD -MP -MF $depbase.Tpo -c -o src/dumpXML.o src/dumpXML.cpp &&\ mv -f $depbase.Tpo $depbase.Po g++ -std=c++11 -g -O2 -o dumpXML src/dumpXML.o -lupnpp -lpthread -lrt depbase=`echo src/rdcvolume.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ g++ -DHAVE_CONFIG_H -I. -I./src -std=c++11 -g -O2 -MT src/rdcvolume.o -MD -MP -MF $depbase.Tpo -c -o src/rdcvolume.o src/rdcvolume.cpp &&\ mv -f $depbase.Tpo $depbase.Po g++ -std=c++11 -g -O2 -o rdcvolume src/rdcvolume.o -lupnpp -lpthread -lrt depbase=`echo src/myrdcvolume.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ g++ -DHAVE_CONFIG_H -I. -I./src -std=c++11 -g -O2 -MT src/myrdcvolume.o -MD -MP -MF $depbase.Tpo -c -o src/myrdcvolume.o src/myrdcvolume.cpp &&\ mv -f $depbase.Tpo $depbase.Po g++ -std=c++11 -g -O2 -o myrdcvolume src/myrdcvolume.o -lupnpp -lpthread -lrt depbase=`echo hello_src/hellodevice.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ g++ -DHAVE_CONFIG_H -I. -I./src -std=c++11 -g -O2 -MT hello_src/hellodevice.o -MD -MP -MF $depbase.Tpo -c -o hello_src/hellodevice.o hello_src/hellodevice.cpp &&\ mv -f $depbase.Tpo $depbase.Po g++ -std=c++11 -g -O2 -o hellodevice hello_src/hellodevice.o -lupnpp -lpthread -lrt depbase=`echo hello_src/helloctl.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ g++ -DHAVE_CONFIG_H -I. -I./src -std=c++11 -g -O2 -MT hello_src/helloctl.o -MD -MP -MF $depbase.Tpo -c -o hello_src/helloctl.o hello_src/helloctl.cpp &&\ mv -f $depbase.Tpo $depbase.Po g++ -std=c++11 -g -O2 -o helloctl hello_src/helloctl.o -lupnpp -lpthread -lrt make[1]: Entering directory '/home/pi/mosbuild/libupnppsamples-code' /bin/mkdir -p '/usr/local/bin' /usr/bin/install -c typedservice ohsender ohradio upexplorer multirdr upsend uplistdir dumpXML rdcvolume myrdcvolume hellodevice helloctl '/usr/local/bin' make[1]: Nothing to be done for 'install-data-am'. make[1]: Leaving directory '/home/pi/mosbuild/libupnppsamples-code' ** Cleanup //////////////////////////////////////////////////////////////// // // COMPONENT 7 - Optionally install gmusicapi // //////////////////////////////////////////////////////////////// This component enables access to Google Play Music service via UPnP renderer. If its not installed, the Google Play section in UPnP config screen will not be present. sudo pip install gmusicapi ** Reboot 9 ** Reboot Connection to moode.local closed by remote host. Connection to moode.local closed. [kenji@ 2A3single ~]$ ssh pi@moode.local pi@moode.local's password: Linux kernel 4.14.32-v7+ running on armv7l architecture ____ __ __ _ ___ / __ \___/ /__ / ' \/ _ \/ /_/ / _ / -_) /_/_/_/\___/\____/\_,_/\__/ moOde audio player (C) 2014 Tim Curtis The programs included with Moode are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Moode comes with absolutely no warranties expressed or implied, or any other guarantees. Last login: Mon Apr 30 09:07:43 2018 from 192.168.1.2 pi@moode:~ $ moslog Get:115 http://ftp.tsukuba.wide.ad.jp/Linux/raspbian/raspbian stretch/main armhf xserver-xorg-input-all armhf 1:7.7+19 [37.9 kB] Get:116 http://ftp.tsukuba.wide.ad.jp/Linux/raspbian/raspbian stretch/main armhf xserver-xorg-input-wacom armhf 0.34.0-1 [81.4 kB] Get:117 http://ftp.tsukuba.wide.ad.jp/Linux/raspbian/raspbian stretch/main armhf xserver-xorg armhf 1:7.7+19 [93.7 kB] Get:118 http://ftp.tsukuba.wide.ad.jp/Linux/raspbian/raspbian stretch/main armhf xorg-docs-core all 1:1.7.1-1 [83.8 kB] Get:119 http://ftp.tsukuba.wide.ad.jp/Linux/raspbian/raspbian stretch/main armhf xorg armhf 1:7.7+19 [38.4 kB] Get:120 http://archive.raspberrypi.org/debian stretch/ui armhf gtk-update-icon-cache armhf 3.22.11-1+rpi3 [75.9 kB] Get:121 http://archive.raspberrypi.org/debian stretch/ui armhf libgtk-3-common all 3.22.11-1+rpi3 [3,415 kB] Get:122 http://archive.raspberrypi.org/debian stretch/main armhf libcairo-gobject2 armhf 1.14.8-1+rpi1 [335 kB] Get:123 http://archive.raspberrypi.org/debian stretch/ui armhf libgtk-3-0 armhf 3.22.11-1+rpi3 [2,077 kB] Get:124 http://archive.raspberrypi.org/debian stretch/main armhf chromium-browser armhf 60.0.3112.89-0ubuntu0.14.04.1.1010+1 [58.4 MB] Get:125 http://archive.raspberrypi.org/debian stretch/ui armhf libgtk-3-bin armhf 3.22.11-1+rpi3 [106 kB] Get:126 http://archive.raspberrypi.org/debian stretch/main armhf xserver-common all 2:1.19.2-1+rpt1+deb9u2 [2,059 kB] Get:127 http://archive.raspberrypi.org/debian stretch/main armhf xserver-xorg-core armhf 2:1.19.2-1+rpt1+deb9u2 [3,120 kB] Get:128 http://archive.raspberrypi.org/debian stretch/main armhf xserver-xorg-legacy armhf 2:1.19.2-1+rpt1+deb9u2 [2,067 kB] Extracting templates from packages: 100% Preconfiguring packages ... Fetched 115 MB in 10min 53s (176 kB/s) Selecting previously unselected package gconf2-common. (Reading database ... 61509 files and directories currently installed.) Preparing to unpack .../000-gconf2-common_3.2.6-4_all.deb ... Unpacking gconf2-common (3.2.6-4) ... Selecting previously unselected package libgconf-2-4:armhf. Preparing to unpack .../001-libgconf-2-4_3.2.6-4_armhf.deb ... Unpacking libgconf-2-4:armhf (3.2.6-4) ... Selecting previously unselected package gconf-service. Preparing to unpack .../002-gconf-service_3.2.6-4_armhf.deb ... Unpacking gconf-service (3.2.6-4) ... Selecting previously unselected package libatk1.0-data. Preparing to unpack .../003-libatk1.0-data_2.22.0-1_all.deb ... Unpacking libatk1.0-data (2.22.0-1) ... Selecting previously unselected package libatk1.0-0:armhf. Preparing to unpack .../004-libatk1.0-0_2.22.0-1_armhf.deb ... Unpacking libatk1.0-0:armhf (2.22.0-1) ... Selecting previously unselected package libgdk-pixbuf2.0-common. Preparing to unpack .../005-libgdk-pixbuf2.0-common_2.36.5-2+deb9u2_all.deb ... Unpacking libgdk-pixbuf2.0-common (2.36.5-2+deb9u2) ... Selecting previously unselected package libgdk-pixbuf2.0-0:armhf. Preparing to unpack .../006-libgdk-pixbuf2.0-0_2.36.5-2+deb9u2_armhf.deb ... Unpacking libgdk-pixbuf2.0-0:armhf (2.36.5-2+deb9u2) ... Selecting previously unselected package libgtk2.0-common. Preparing to unpack .../007-libgtk2.0-common_2.24.31-2_all.deb ... Unpacking libgtk2.0-common (2.24.31-2) ... Selecting previously unselected package fontconfig. Preparing to unpack .../008-fontconfig_2.11.0-6.7_armhf.deb ... Unpacking fontconfig (2.11.0-6.7) ... Selecting previously unselected package libthai-data. Preparing to unpack .../009-libthai-data_0.1.26-1_all.deb ... Unpacking libthai-data (0.1.26-1) ... Selecting previously unselected package libdatrie1:armhf. Preparing to unpack .../010-libdatrie1_0.2.10-4_armhf.deb ... Unpacking libdatrie1:armhf (0.2.10-4) ... Selecting previously unselected package libthai0:armhf. Preparing to unpack .../011-libthai0_0.1.26-1_armhf.deb ... Unpacking libthai0:armhf (0.1.26-1) ... Selecting previously unselected package libpango-1.0-0:armhf. Preparing to unpack .../012-libpango-1.0-0_1.40.5-1_armhf.deb ... Unpacking libpango-1.0-0:armhf (1.40.5-1) ... Selecting previously unselected package libpangoft2-1.0-0:armhf. Preparing to unpack .../013-libpangoft2-1.0-0_1.40.5-1_armhf.deb ... Unpacking libpangoft2-1.0-0:armhf (1.40.5-1) ... Selecting previously unselected package libpangocairo-1.0-0:armhf. Preparing to unpack .../014-libpangocairo-1.0-0_1.40.5-1_armhf.deb ... Unpacking libpangocairo-1.0-0:armhf (1.40.5-1) ... Selecting previously unselected package hicolor-icon-theme. Preparing to unpack .../015-hicolor-icon-theme_0.15-1_all.deb ... Unpacking hicolor-icon-theme (0.15-1) ... Selecting previously unselected package gtk-update-icon-cache. Preparing to unpack .../016-gtk-update-icon-cache_3.22.11-1+rpi3_armhf.deb ... No diversion 'diversion of /usr/sbin/update-icon-caches to /usr/sbin/update-icon-caches.gtk2 by libgtk-3-bin', none removed. No diversion 'diversion of /usr/share/man/man8/update-icon-caches.8.gz to /usr/share/man/man8/update-icon-caches.gtk2.8.gz by libgtk-3-bin', none removed. Unpacking gtk-update-icon-cache (3.22.11-1+rpi3) ... Selecting previously unselected package librsvg2-2:armhf. Preparing to unpack .../017-librsvg2-2_2.40.16-1_armhf.deb ... Unpacking librsvg2-2:armhf (2.40.16-1) ... Selecting previously unselected package librsvg2-common:armhf. Preparing to unpack .../018-librsvg2-common_2.40.16-1_armhf.deb ... Unpacking librsvg2-common:armhf (2.40.16-1) ... Selecting previously unselected package adwaita-icon-theme. Preparing to unpack .../019-adwaita-icon-theme_3.22.0-1+deb9u1_all.deb ... Unpacking adwaita-icon-theme (3.22.0-1+deb9u1) ... Selecting previously unselected package libgtk2.0-0:armhf. Preparing to unpack .../020-libgtk2.0-0_2.24.31-2_armhf.deb ... Unpacking libgtk2.0-0:armhf (2.24.31-2) ... Selecting previously unselected package libnspr4:armhf. Preparing to unpack .../021-libnspr4_2%3a4.12-6_armhf.deb ... Unpacking libnspr4:armhf (2:4.12-6) ... Selecting previously unselected package libnss3:armhf. Preparing to unpack .../022-libnss3_2%3a3.26.2-1.1+deb9u1_armhf.deb ... Unpacking libnss3:armhf (2:3.26.2-1.1+deb9u1) ... Selecting previously unselected package libxcb-util0:armhf. Preparing to unpack .../023-libxcb-util0_0.3.8-3_armhf.deb ... Unpacking libxcb-util0:armhf (0.3.8-3) ... Selecting previously unselected package libxcb-image0:armhf. Preparing to unpack .../024-libxcb-image0_0.4.0-1_armhf.deb ... Unpacking libxcb-image0:armhf (0.4.0-1) ... Selecting previously unselected package xdg-utils. Preparing to unpack .../025-xdg-utils_1.1.1-1_all.deb ... Unpacking xdg-utils (1.1.1-1) ... Selecting previously unselected package libdconf1:armhf. Preparing to unpack .../026-libdconf1_0.26.0-2_armhf.deb ... Unpacking libdconf1:armhf (0.26.0-2) ... Selecting previously unselected package dconf-service. Preparing to unpack .../027-dconf-service_0.26.0-2_armhf.deb ... Unpacking dconf-service (0.26.0-2) ... Selecting previously unselected package dconf-gsettings-backend:armhf. Preparing to unpack .../028-dconf-gsettings-backend_0.26.0-2_armhf.deb ... Unpacking dconf-gsettings-backend:armhf (0.26.0-2) ... Selecting previously unselected package libgtk-3-common. Preparing to unpack .../029-libgtk-3-common_3.22.11-1+rpi3_all.deb ... Unpacking libgtk-3-common (3.22.11-1+rpi3) ... Selecting previously unselected package libatspi2.0-0:armhf. Preparing to unpack .../030-libatspi2.0-0_2.22.0-6+deb9u1_armhf.deb ... Unpacking libatspi2.0-0:armhf (2.22.0-6+deb9u1) ... Selecting previously unselected package libatk-bridge2.0-0:armhf. Preparing to unpack .../031-libatk-bridge2.0-0_2.22.0-2_armhf.deb ... Unpacking libatk-bridge2.0-0:armhf (2.22.0-2) ... Selecting previously unselected package libcairo-gobject2:armhf. Preparing to unpack .../032-libcairo-gobject2_1.14.8-1+rpi1_armhf.deb ... Unpacking libcairo-gobject2:armhf (1.14.8-1+rpi1) ... Selecting previously unselected package liblcms2-2:armhf. Preparing to unpack .../033-liblcms2-2_2.8-4_armhf.deb ... Unpacking liblcms2-2:armhf (2.8-4) ... Selecting previously unselected package libcolord2:armhf. Preparing to unpack .../034-libcolord2_1.3.3-2_armhf.deb ... Unpacking libcolord2:armhf (1.3.3-2) ... Selecting previously unselected package libepoxy0:armhf. Preparing to unpack .../035-libepoxy0_1.3.1-2_armhf.deb ... Unpacking libepoxy0:armhf (1.3.1-2) ... Selecting previously unselected package libjson-glib-1.0-common. Preparing to unpack .../036-libjson-glib-1.0-common_1.2.6-1_all.deb ... Unpacking libjson-glib-1.0-common (1.2.6-1) ... Selecting previously unselected package libjson-glib-1.0-0:armhf. Preparing to unpack .../037-libjson-glib-1.0-0_1.2.6-1_armhf.deb ... Unpacking libjson-glib-1.0-0:armhf (1.2.6-1) ... Selecting previously unselected package libproxy1v5:armhf. Preparing to unpack .../038-libproxy1v5_0.4.14-2_armhf.deb ... Unpacking libproxy1v5:armhf (0.4.14-2) ... Selecting previously unselected package glib-networking-common. Preparing to unpack .../039-glib-networking-common_2.50.0-1_all.deb ... Unpacking glib-networking-common (2.50.0-1) ... Selecting previously unselected package glib-networking-services. Preparing to unpack .../040-glib-networking-services_2.50.0-1_armhf.deb ... Unpacking glib-networking-services (2.50.0-1) ... Selecting previously unselected package gsettings-desktop-schemas. Preparing to unpack .../041-gsettings-desktop-schemas_3.22.0-1_all.deb ... Unpacking gsettings-desktop-schemas (3.22.0-1) ... Selecting previously unselected package glib-networking:armhf. Preparing to unpack .../042-glib-networking_2.50.0-1_armhf.deb ... Unpacking glib-networking:armhf (2.50.0-1) ... Selecting previously unselected package libsoup2.4-1:armhf. Preparing to unpack .../043-libsoup2.4-1_2.56.0-2+deb9u1_armhf.deb ... Unpacking libsoup2.4-1:armhf (2.56.0-2+deb9u1) ... Selecting previously unselected package libsoup-gnome2.4-1:armhf. Preparing to unpack .../044-libsoup-gnome2.4-1_2.56.0-2+deb9u1_armhf.deb ... Unpacking libsoup-gnome2.4-1:armhf (2.56.0-2+deb9u1) ... Selecting previously unselected package librest-0.7-0:armhf. Preparing to unpack .../045-librest-0.7-0_0.8.0-2_armhf.deb ... Unpacking librest-0.7-0:armhf (0.8.0-2) ... Selecting previously unselected package libgtk-3-0:armhf. Preparing to unpack .../046-libgtk-3-0_3.22.11-1+rpi3_armhf.deb ... Unpacking libgtk-3-0:armhf (3.22.11-1+rpi3) ... Selecting previously unselected package chromium-browser. Preparing to unpack .../047-chromium-browser_60.0.3112.89-0ubuntu0.14.04.1.1010+1_armhf.deb ... Unpacking chromium-browser (60.0.3112.89-0ubuntu0.14.04.1.1010+1) ... Selecting previously unselected package libmtdev1:armhf. Preparing to unpack .../048-libmtdev1_1.1.5-1_armhf.deb ... Unpacking libmtdev1:armhf (1.1.5-1) ... Selecting previously unselected package at-spi2-core. Preparing to unpack .../049-at-spi2-core_2.22.0-6+deb9u1_armhf.deb ... Unpacking at-spi2-core (2.22.0-6+deb9u1) ... Selecting previously unselected package libauthen-sasl-perl. Preparing to unpack .../050-libauthen-sasl-perl_2.1600-1_all.deb ... Unpacking libauthen-sasl-perl (2.1600-1) ... Selecting previously unselected package libencode-locale-perl. Preparing to unpack .../051-libencode-locale-perl_1.05-1_all.deb ... Unpacking libencode-locale-perl (1.05-1) ... Selecting previously unselected package libevdev2:armhf. Preparing to unpack .../052-libevdev2_1.5.6+dfsg-1_armhf.deb ... Unpacking libevdev2:armhf (1.5.6+dfsg-1) ... Selecting previously unselected package libipc-system-simple-perl. Preparing to unpack .../053-libipc-system-simple-perl_1.25-3_all.deb ... Unpacking libipc-system-simple-perl (1.25-3) ... Selecting previously unselected package libfile-basedir-perl. Preparing to unpack .../054-libfile-basedir-perl_0.07-1_all.deb ... Unpacking libfile-basedir-perl (0.07-1) ... Selecting previously unselected package liburi-perl. Preparing to unpack .../055-liburi-perl_1.71-1_all.deb ... Unpacking liburi-perl (1.71-1) ... Selecting previously unselected package libfile-desktopentry-perl. Preparing to unpack .../056-libfile-desktopentry-perl_0.22-1_all.deb ... Unpacking libfile-desktopentry-perl (0.22-1) ... Selecting previously unselected package libhttp-date-perl. Preparing to unpack .../057-libhttp-date-perl_6.02-1_all.deb ... Unpacking libhttp-date-perl (6.02-1) ... Selecting previously unselected package libfile-listing-perl. Preparing to unpack .../058-libfile-listing-perl_6.04-1_all.deb ... Unpacking libfile-listing-perl (6.04-1) ... Selecting previously unselected package libfile-mimeinfo-perl. Preparing to unpack .../059-libfile-mimeinfo-perl_0.27-1_all.deb ... Unpacking libfile-mimeinfo-perl (0.27-1) ... Selecting previously unselected package libfont-afm-perl. Preparing to unpack .../060-libfont-afm-perl_1.20-2_all.deb ... Unpacking libfont-afm-perl (1.20-2) ... Selecting previously unselected package libgail18:armhf. Preparing to unpack .../061-libgail18_2.24.31-2_armhf.deb ... Unpacking libgail18:armhf (2.24.31-2) ... Selecting previously unselected package libgail-common:armhf. Preparing to unpack .../062-libgail-common_2.24.31-2_armhf.deb ... Unpacking libgail-common:armhf (2.24.31-2) ... Selecting previously unselected package libglu1-mesa:armhf. Preparing to unpack .../063-libglu1-mesa_9.0.0-2.1_armhf.deb ... Unpacking libglu1-mesa:armhf (9.0.0-2.1) ... Selecting previously unselected package libgtk-3-bin. Preparing to unpack .../064-libgtk-3-bin_3.22.11-1+rpi3_armhf.deb ... Unpacking libgtk-3-bin (3.22.11-1+rpi3) ... Selecting previously unselected package libgtk2.0-bin. Preparing to unpack .../065-libgtk2.0-bin_2.24.31-2_armhf.deb ... Unpacking libgtk2.0-bin (2.24.31-2) ... Selecting previously unselected package libhtml-tagset-perl. Preparing to unpack .../066-libhtml-tagset-perl_3.20-3_all.deb ... Unpacking libhtml-tagset-perl (3.20-3) ... Selecting previously unselected package libhtml-parser-perl. Preparing to unpack .../067-libhtml-parser-perl_3.72-3_armhf.deb ... Unpacking libhtml-parser-perl (3.72-3) ... Selecting previously unselected package libio-html-perl. Preparing to unpack .../068-libio-html-perl_1.001-1_all.deb ... Unpacking libio-html-perl (1.001-1) ... Selecting previously unselected package liblwp-mediatypes-perl. Preparing to unpack .../069-liblwp-mediatypes-perl_6.02-1_all.deb ... Unpacking liblwp-mediatypes-perl (6.02-1) ... Selecting previously unselected package libhttp-message-perl. Preparing to unpack .../070-libhttp-message-perl_6.11-1_all.deb ... Unpacking libhttp-message-perl (6.11-1) ... Selecting previously unselected package libhtml-form-perl. Preparing to unpack .../071-libhtml-form-perl_6.03-1_all.deb ... Unpacking libhtml-form-perl (6.03-1) ... Selecting previously unselected package libhtml-tree-perl. Preparing to unpack .../072-libhtml-tree-perl_5.03-2_all.deb ... Unpacking libhtml-tree-perl (5.03-2) ... Selecting previously unselected package libhtml-format-perl. Preparing to unpack .../073-libhtml-format-perl_2.12-1_all.deb ... Unpacking libhtml-format-perl (2.12-1) ... Selecting previously unselected package libhttp-cookies-perl. Preparing to unpack .../074-libhttp-cookies-perl_6.01-1_all.deb ... Unpacking libhttp-cookies-perl (6.01-1) ... Selecting previously unselected package libhttp-daemon-perl. Preparing to unpack .../075-libhttp-daemon-perl_6.01-1_all.deb ... Unpacking libhttp-daemon-perl (6.01-1) ... Selecting previously unselected package libhttp-negotiate-perl. Preparing to unpack .../076-libhttp-negotiate-perl_6.00-2_all.deb ... Unpacking libhttp-negotiate-perl (6.00-2) ... Selecting previously unselected package libwacom-common. Preparing to unpack .../077-libwacom-common_0.22-1_all.deb ... Unpacking libwacom-common (0.22-1) ... Selecting previously unselected package libwacom2:armhf. Preparing to unpack .../078-libwacom2_0.22-1_armhf.deb ... Unpacking libwacom2:armhf (0.22-1) ... Selecting previously unselected package libinput-bin. Preparing to unpack .../079-libinput-bin_1.6.3-1_armhf.deb ... Unpacking libinput-bin (1.6.3-1) ... Selecting previously unselected package libinput10:armhf. Preparing to unpack .../080-libinput10_1.6.3-1_armhf.deb ... Unpacking libinput10:armhf (1.6.3-1) ... Selecting previously unselected package perl-openssl-defaults:armhf. Preparing to unpack .../081-perl-openssl-defaults_3_armhf.deb ... Unpacking perl-openssl-defaults:armhf (3) ... Selecting previously unselected package libnet-ssleay-perl. Preparing to unpack .../082-libnet-ssleay-perl_1.80-1_armhf.deb ... Unpacking libnet-ssleay-perl (1.80-1) ... Selecting previously unselected package libio-socket-ssl-perl. Preparing to unpack .../083-libio-socket-ssl-perl_2.044-1_all.deb ... Unpacking libio-socket-ssl-perl (2.044-1) ... Selecting previously unselected package libnet-http-perl. Preparing to unpack .../084-libnet-http-perl_6.12-1_all.deb ... Unpacking libnet-http-perl (6.12-1) ... Selecting previously unselected package libwww-robotrules-perl. Preparing to unpack .../085-libwww-robotrules-perl_6.01-1_all.deb ... Unpacking libwww-robotrules-perl (6.01-1) ... Selecting previously unselected package libwww-perl. Preparing to unpack .../086-libwww-perl_6.15-1_all.deb ... Unpacking libwww-perl (6.15-1) ... Selecting previously unselected package liblwp-protocol-https-perl. Preparing to unpack .../087-liblwp-protocol-https-perl_6.06-2_all.deb ... Unpacking liblwp-protocol-https-perl (6.06-2) ... Selecting previously unselected package libnet-smtp-ssl-perl. Preparing to unpack .../088-libnet-smtp-ssl-perl_1.04-1_all.deb ... Unpacking libnet-smtp-ssl-perl (1.04-1) ... Selecting previously unselected package libmailtools-perl. Preparing to unpack .../089-libmailtools-perl_2.18-1_all.deb ... Unpacking libmailtools-perl (2.18-1) ... Selecting previously unselected package libxml-parser-perl. Preparing to unpack .../090-libxml-parser-perl_2.44-2+b1_armhf.deb ... Unpacking libxml-parser-perl (2.44-2+b1) ... Selecting previously unselected package libxml-twig-perl. Preparing to unpack .../091-libxml-twig-perl_1%3a3.50-1_all.deb ... Unpacking libxml-twig-perl (1:3.50-1) ... Selecting previously unselected package libnet-dbus-perl. Preparing to unpack .../092-libnet-dbus-perl_1.1.0-4+b1_armhf.deb ... Unpacking libnet-dbus-perl (1.1.0-4+b1) ... Selecting previously unselected package libpciaccess0:armhf. Preparing to unpack .../093-libpciaccess0_0.13.4-1_armhf.deb ... Unpacking libpciaccess0:armhf (0.13.4-1) ... Selecting previously unselected package libtie-ixhash-perl. Preparing to unpack .../094-libtie-ixhash-perl_1.23-2_all.deb ... Unpacking libtie-ixhash-perl (1.23-2) ... Selecting previously unselected package libwacom-bin. Preparing to unpack .../095-libwacom-bin_0.22-1_armhf.deb ... Unpacking libwacom-bin (0.22-1) ... Selecting previously unselected package libx11-protocol-perl. Preparing to unpack .../096-libx11-protocol-perl_0.56-7_all.deb ... Unpacking libx11-protocol-perl (0.56-7) ... Selecting previously unselected package libxfont1:armhf. Preparing to unpack .../097-libxfont1_1%3a1.5.2-4_armhf.deb ... Unpacking libxfont1:armhf (1:1.5.2-4) ... Selecting previously unselected package libxfont2:armhf. Preparing to unpack .../098-libxfont2_1%3a2.0.1-3+deb9u1_armhf.deb ... Unpacking libxfont2:armhf (1:2.0.1-3+deb9u1) ... Selecting previously unselected package libxkbfile1:armhf. Preparing to unpack .../099-libxkbfile1_1%3a1.0.9-2_armhf.deb ... Unpacking libxkbfile1:armhf (1:1.0.9-2) ... Selecting previously unselected package libxml-xpathengine-perl. Preparing to unpack .../100-libxml-xpathengine-perl_0.13-1_all.deb ... Unpacking libxml-xpathengine-perl (0.13-1) ... Selecting previously unselected package x11-apps. Preparing to unpack .../101-x11-apps_7.7+6_armhf.deb ... Unpacking x11-apps (7.7+6) ... Selecting previously unselected package x11-session-utils. Preparing to unpack .../102-x11-session-utils_7.7+2_armhf.deb ... Unpacking x11-session-utils (7.7+2) ... Selecting previously unselected package x11-xkb-utils. Preparing to unpack .../103-x11-xkb-utils_7.7+3_armhf.deb ... Unpacking x11-xkb-utils (7.7+3) ... Selecting previously unselected package x11-xserver-utils. Preparing to unpack .../104-x11-xserver-utils_7.7+7_armhf.deb ... Unpacking x11-xserver-utils (7.7+7) ... Selecting previously unselected package xfonts-encodings. Preparing to unpack .../105-xfonts-encodings_1%3a1.0.4-2_all.deb ... Unpacking xfonts-encodings (1:1.0.4-2) ... Selecting previously unselected package xfonts-utils. Preparing to unpack .../106-xfonts-utils_1%3a7.7+4_armhf.deb ... Unpacking xfonts-utils (1:7.7+4) ... Selecting previously unselected package xfonts-100dpi. Preparing to unpack .../107-xfonts-100dpi_1%3a1.0.4+nmu1_all.deb ... Unpacking xfonts-100dpi (1:1.0.4+nmu1) ... Selecting previously unselected package xfonts-75dpi. Preparing to unpack .../108-xfonts-75dpi_1%3a1.0.4+nmu1_all.deb ... Unpacking xfonts-75dpi (1:1.0.4+nmu1) ... Selecting previously unselected package xfonts-base. Preparing to unpack .../109-xfonts-base_1%3a1.0.4+nmu1_all.deb ... Unpacking xfonts-base (1:1.0.4+nmu1) ... Selecting previously unselected package xfonts-scalable. Preparing to unpack .../110-xfonts-scalable_1%3a1.0.3-1.1_all.deb ... Unpacking xfonts-scalable (1:1.0.3-1.1) ... Selecting previously unselected package xinit. Preparing to unpack .../111-xinit_1.3.4-3_armhf.deb ... Unpacking xinit (1.3.4-3) ... Selecting previously unselected package xserver-common. Preparing to unpack .../112-xserver-common_2%3a1.19.2-1+rpt1+deb9u2_all.deb ... Unpacking xserver-common (2:1.19.2-1+rpt1+deb9u2) ... Selecting previously unselected package xserver-xorg-core. Preparing to unpack .../113-xserver-xorg-core_2%3a1.19.2-1+rpt1+deb9u2_armhf.deb ... Unpacking xserver-xorg-core (2:1.19.2-1+rpt1+deb9u2) ... Selecting previously unselected package xserver-xorg-video-amdgpu. Preparing to unpack .../114-xserver-xorg-video-amdgpu_1.2.0-1+b1_armhf.deb ... Unpacking xserver-xorg-video-amdgpu (1.2.0-1+b1) ... Selecting previously unselected package xserver-xorg-video-radeon. Preparing to unpack .../115-xserver-xorg-video-radeon_1%3a7.8.0-1+b1_armhf.deb ... Unpacking xserver-xorg-video-radeon (1:7.8.0-1+b1) ... Selecting previously unselected package xserver-xorg-video-ati. Preparing to unpack .../116-xserver-xorg-video-ati_1%3a7.8.0-1+b1_armhf.deb ... Unpacking xserver-xorg-video-ati (1:7.8.0-1+b1) ... Selecting previously unselected package xserver-xorg-video-fbdev. Preparing to unpack .../117-xserver-xorg-video-fbdev_1%3a0.4.4-1+rvt+b1_armhf.deb ... Unpacking xserver-xorg-video-fbdev (1:0.4.4-1+rvt+b1) ... Selecting previously unselected package xserver-xorg-video-nouveau. Preparing to unpack .../118-xserver-xorg-video-nouveau_1%3a1.0.13-3_armhf.deb ... Unpacking xserver-xorg-video-nouveau (1:1.0.13-3) ... Selecting previously unselected package xserver-xorg-video-vesa. Preparing to unpack .../119-xserver-xorg-video-vesa_1%3a2.3.4-1+b3_armhf.deb ... Unpacking xserver-xorg-video-vesa (1:2.3.4-1+b3) ... Selecting previously unselected package xserver-xorg-video-all. Preparing to unpack .../120-xserver-xorg-video-all_1%3a7.7+19_armhf.deb ... Unpacking xserver-xorg-video-all (1:7.7+19) ... Selecting previously unselected package xserver-xorg-input-libinput. Preparing to unpack .../121-xserver-xorg-input-libinput_0.23.0-2_armhf.deb ... Unpacking xserver-xorg-input-libinput (0.23.0-2) ... Selecting previously unselected package xserver-xorg-input-all. Preparing to unpack .../122-xserver-xorg-input-all_1%3a7.7+19_armhf.deb ... Unpacking xserver-xorg-input-all (1:7.7+19) ... Selecting previously unselected package xserver-xorg-input-wacom. Preparing to unpack .../123-xserver-xorg-input-wacom_0.34.0-1_armhf.deb ... Unpacking xserver-xorg-input-wacom (0.34.0-1) ... Selecting previously unselected package xserver-xorg. Preparing to unpack .../124-xserver-xorg_1%3a7.7+19_armhf.deb ... Unpacking xserver-xorg (1:7.7+19) ... Selecting previously unselected package xorg-docs-core. Preparing to unpack .../125-xorg-docs-core_1%3a1.7.1-1_all.deb ... Unpacking xorg-docs-core (1:1.7.1-1) ... Selecting previously unselected package xorg. Preparing to unpack .../126-xorg_1%3a7.7+19_armhf.deb ... Unpacking xorg (1:7.7+19) ... Selecting previously unselected package xserver-xorg-legacy. Preparing to unpack .../127-xserver-xorg-legacy_2%3a1.19.2-1+rpt1+deb9u2_armhf.deb ... Unpacking xserver-xorg-legacy (2:1.19.2-1+rpt1+deb9u2) ... Setting up libxkbfile1:armhf (1:1.0.9-2) ... Setting up libhtml-tagset-perl (3.20-3) ... Setting up gconf2-common (3.2.6-4) ... Creating config file /etc/gconf/2/path with new version Setting up libfont-afm-perl (1.20-2) ... Setting up libjson-glib-1.0-common (1.2.6-1) ... Setting up libgtk2.0-common (2.24.31-2) ... Setting up libhttp-date-perl (6.02-1) ... Setting up libxcb-util0:armhf (0.3.8-3) ... Setting up glib-networking-common (2.50.0-1) ... Setting up x11-session-utils (7.7+2) ... Setting up libwacom-common (0.22-1) ... Setting up libwacom2:armhf (0.22-1) ... Setting up libxcb-image0:armhf (0.4.0-1) ... Processing triggers for mime-support (3.60) ... Setting up x11-xkb-utils (7.7+3) ... Setting up libevdev2:armhf (1.5.6+dfsg-1) ... Setting up libencode-locale-perl (1.05-1) ... Setting up xinit (1.3.4-3) ... Setting up liblcms2-2:armhf (2.8-4) ... Setting up perl-openssl-defaults:armhf (3) ... Setting up libipc-system-simple-perl (1.25-3) ... Setting up libfile-basedir-perl (0.07-1) ... Setting up libatspi2.0-0:armhf (2.22.0-6+deb9u1) ... Setting up at-spi2-core (2.22.0-6+deb9u1) ... Processing triggers for libglib2.0-0:armhf (2.50.3-2) ... Setting up libio-html-perl (1.001-1) ... Setting up libcairo-gobject2:armhf (1.14.8-1+rpi1) ... Setting up libproxy1v5:armhf (0.4.14-2) ... Setting up libtie-ixhash-perl (1.23-2) ... Setting up libgdk-pixbuf2.0-common (2.36.5-2+deb9u2) ... Setting up libxfont2:armhf (1:2.0.1-3+deb9u1) ... Setting up glib-networking-services (2.50.0-1) ... Setting up libdatrie1:armhf (0.2.10-4) ... Processing triggers for sgml-base (1.29) ... Setting up libinput-bin (1.6.3-1) ... Setting up libnspr4:armhf (2:4.12-6) ... Setting up xfonts-encodings (1:1.0.4-2) ... Setting up libxfont1:armhf (1:1.5.2-4) ... Setting up libjson-glib-1.0-0:armhf (1.2.6-1) ... Setting up libatk1.0-data (2.22.0-1) ... Setting up libwacom-bin (0.22-1) ... Setting up liblwp-mediatypes-perl (6.02-1) ... Processing triggers for libc-bin (2.24-11+deb9u3) ... Setting up libepoxy0:armhf (1.3.1-2) ... Processing triggers for udev (232-25+deb9u2) ... Setting up liburi-perl (1.71-1) ... Setting up libatk1.0-0:armhf (2.22.0-1) ... Setting up libhtml-parser-perl (3.72-3) ... Setting up libmtdev1:armhf (1.1.5-1) ... Setting up libatk-bridge2.0-0:armhf (2.22.0-2) ... Setting up libdconf1:armhf (0.26.0-2) ... Setting up libfile-listing-perl (6.04-1) ... Setting up x11-xserver-utils (7.7+7) ... Setting up libpciaccess0:armhf (0.13.4-1) ... Setting up libx11-protocol-perl (0.56-7) ... Setting up libxml-xpathengine-perl (0.13-1) ... Processing triggers for man-db (2.7.6.1-2) ... Setting up libhttp-message-perl (6.11-1) ... Setting up libglu1-mesa:armhf (9.0.0-2.1) ... Setting up libnet-http-perl (6.12-1) ... Setting up x11-apps (7.7+6) ... Setting up libcolord2:armhf (1.3.3-2) ... Setting up libthai-data (0.1.26-1) ... Setting up xdg-utils (1.1.1-1) ... Setting up hicolor-icon-theme (0.15-1) ... Setting up libwww-robotrules-perl (6.01-1) ... Setting up libauthen-sasl-perl (2.1600-1) ... Setting up xorg-docs-core (1:1.7.1-1) ... Setting up fontconfig (2.11.0-6.7) ... Regenerating fonts cache... done. Setting up libhttp-negotiate-perl (6.00-2) ... Setting up xserver-common (2:1.19.2-1+rpt1+deb9u2) ... Setting up libhttp-cookies-perl (6.01-1) ... Setting up dconf-service (0.26.0-2) ... Setting up libnet-ssleay-perl (1.80-1) ... Setting up libgconf-2-4:armhf (3.2.6-4) ... Setting up libgdk-pixbuf2.0-0:armhf (2.36.5-2+deb9u2) ... Setting up libinput10:armhf (1.6.3-1) ... Setting up libnss3:armhf (2:3.26.2-1.1+deb9u1) ... Setting up xfonts-utils (1:7.7+4) ... Setting up libhttp-daemon-perl (6.01-1) ... Setting up libthai0:armhf (0.1.26-1) ... Setting up xserver-xorg-core (2:1.19.2-1+rpt1+deb9u2) ... Setting up libio-socket-ssl-perl (2.044-1) ... Setting up libhtml-tree-perl (5.03-2) ... Setting up xserver-xorg-video-radeon (1:7.8.0-1+b1) ... Setting up gconf-service (3.2.6-4) ... Setting up xfonts-75dpi (1:1.0.4+nmu1) ... Setting up gtk-update-icon-cache (3.22.11-1+rpi3) ... Setting up xserver-xorg-video-vesa (1:2.3.4-1+b3) ... Setting up libfile-desktopentry-perl (0.22-1) ... Setting up xserver-xorg-video-amdgpu (1.2.0-1+b1) ... Setting up libpango-1.0-0:armhf (1.40.5-1) ... Setting up xfonts-100dpi (1:1.0.4+nmu1) ... Setting up libhtml-form-perl (6.03-1) ... Setting up xfonts-scalable (1:1.0.3-1.1) ... Setting up xserver-xorg-input-wacom (0.34.0-1) ... Setting up libfile-mimeinfo-perl (0.27-1) ... Setting up dconf-gsettings-backend:armhf (0.26.0-2) ... Setting up xserver-xorg-legacy (2:1.19.2-1+rpt1+deb9u2) ... Setting up xfonts-base (1:1.0.4+nmu1) ... Setting up xserver-xorg-video-ati (1:7.8.0-1+b1) ... Setting up libnet-smtp-ssl-perl (1.04-1) ... Setting up libhtml-format-perl (2.12-1) ... Setting up gsettings-desktop-schemas (3.22.0-1) ... Setting up libgtk-3-common (3.22.11-1+rpi3) ... Setting up xserver-xorg-video-nouveau (1:1.0.13-3) ... Setting up xserver-xorg-video-fbdev (1:0.4.4-1+rvt+b1) ... Setting up xserver-xorg-input-libinput (0.23.0-2) ... Setting up xserver-xorg-video-all (1:7.7+19) ... Setting up libpangoft2-1.0-0:armhf (1.40.5-1) ... Setting up xserver-xorg (1:7.7+19) ... Setting up glib-networking:armhf (2.50.0-1) ... Setting up xorg (1:7.7+19) ... Setting up xserver-xorg-input-all (1:7.7+19) ... Setting up libmailtools-perl (2.18-1) ... Setting up libsoup2.4-1:armhf (2.56.0-2+deb9u1) ... Setting up libsoup-gnome2.4-1:armhf (2.56.0-2+deb9u1) ... Setting up libpangocairo-1.0-0:armhf (1.40.5-1) ... Setting up librest-0.7-0:armhf (0.8.0-2) ... Setting up librsvg2-2:armhf (2.40.16-1) ... Setting up librsvg2-common:armhf (2.40.16-1) ... Setting up adwaita-icon-theme (3.22.0-1+deb9u1) ... update-alternatives: using /usr/share/icons/Adwaita/cursor.theme to provide /usr/share/icons/default/index.theme (x-cursor-theme) in auto mode Setting up libgtk2.0-0:armhf (2.24.31-2) ... Setting up libgail18:armhf (2.24.31-2) ... Setting up libgail-common:armhf (2.24.31-2) ... Setting up libgtk-3-0:armhf (3.22.11-1+rpi3) ... Setting up libgtk-3-bin (3.22.11-1+rpi3) ... Setting up libgtk2.0-bin (2.24.31-2) ... Setting up chromium-browser (60.0.3112.89-0ubuntu0.14.04.1.1010+1) ... update-alternatives: using /usr/bin/chromium-browser to provide /usr/bin/x-www-browser (x-www-browser) in auto mode update-alternatives: using /usr/bin/chromium-browser to provide /usr/bin/gnome-www-browser (gnome-www-browser) in auto mode Setting up libwww-perl (6.15-1) ... Setting up liblwp-protocol-https-perl (6.06-2) ... Setting up libxml-parser-perl (2.44-2+b1) ... Setting up libxml-twig-perl (1:3.50-1) ... Setting up libnet-dbus-perl (1.1.0-4+b1) ... Processing triggers for libc-bin (2.24-11+deb9u3) ... Processing triggers for libgdk-pixbuf2.0-0:armhf (2.36.5-2+deb9u2) ... ** Permissions and service config ** Cleanup Configure Chrome Browser NOTE: These steps are performed AFTER actually starting local display via System config, rebooting and then accessing moOde on the local display. a. Connect a keyboard. b. Press Ctrl-t to open a separate instance of Chrome Browser. c. Enter url chrome://flags and scroll down to Overlay Scrollbars and enable the setting. d. Optionally, enter url chrome://extensions and install the xontab virtual keyboard extension. //////////////////////////////////////////////////////////////// // // COMPONENT 9 - Allo Piano 2.1 Firmware // //////////////////////////////////////////////////////////////// Download and install firmware --2018-04-30 09:32:09-- https://github.com/allocom/piano-firmware/archive/master.zip Resolving github.com (github.com)... 192.30.255.112, 192.30.255.113 Connecting to github.com (github.com)|192.30.255.112|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://codeload.github.com/allocom/piano-firmware/zip/master [following] --2018-04-30 09:32:10-- https://codeload.github.com/allocom/piano-firmware/zip/master Resolving codeload.github.com (codeload.github.com)... 192.30.255.120, 192.30.255.121 Connecting to codeload.github.com (codeload.github.com)|192.30.255.120|:443... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [application/zip] Saving to: ‘master.zip’ 0K .......... .......... .......... .......... .......... 179K 50K .......... .......... .......... .......... .......... 361K 100K .......... .......... .......... .......... .......... 2.21M 150K .......... .......... .......... .......... .......... 474K 200K .......... .......... .......... .......... .......... 3.12M 250K .......... .......... .......... .......... .......... 3.72M 300K ...... 3.62M=0.6s 2018-04-30 09:32:12 (532 KB/s) - ‘master.zip’ saved [313468] Cleanup //////////////////////////////////////////////////////////////// // // Final cleanup // //////////////////////////////////////////////////////////////// ** Remove mosbuild ** Clean package cache ** Clear syslogs ** Mon 30 Apr 09:32:13 EDT 2018 ** Installation time : 01:53:04 //////////////////////////////////////////////////////////////// // END //////////////////////////////////////////////////////////////// ** Final reboot Connection to moode.local closed by remote host. Connection to moode.local closed. [kenji@ 2A3single ~]$ ssh pi@moode.local pi@moode.local's password: Linux kernel 4.14.32-v7+ running on armv7l architecture ____ __ __ _ ___ / __ \___/ /__ / ' \/ _ \/ /_/ / _ / -_) /_/_/_/\___/\____/\_,_/\__/ moOde audio player (C) 2014 Tim Curtis The programs included with Moode are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Moode comes with absolutely no warranties expressed or implied, or any other guarantees. pi@moode:~ $ moslog ** Clean package cache ** Clear syslogs ** Mon 30 Apr 09:32:13 EDT 2018 ** Installation time : 01:53:04 //////////////////////////////////////////////////////////////// // END //////////////////////////////////////////////////////////////// ** Final reboot ^C pi@moode:~ $ reboot Failed to set wall message, ignoring: Interactive authentication required. Failed to reboot system via logind: Interactive authentication required. Failed to open /dev/initctl: Permission denied Failed to talk to init daemon. pi@moode:~ $ Connection to moode.local closed by remote host. Connection to moode.local closed. [kenji@ 2A3single ~]$